M095 - 45T DIFF SPUR GEAR

This wider wheel hex modifies the vehicle's handling characteristics by altering steering feel and vehicle roll stiffness. It is versatile for use on both the front and rear ends, enabling smoother steering when mounted at the front and improved traction when mounted at the rear.

IFB8 shock stroke and rebound gauge. Allows easy measurement of important shock length while mounted on the vehicle during suspension setup. Supports stroke from 60mm to 150mm. Can also be used on vehicles other than IFB8.

Machined from 7075-T6 alloy, this part enhances strength and stiffness, surpassing the stock plastic component.

The 9.0T rear spring represents a significant increase in stiffness compared to the stock spring (10.0T), providing enhanced support to the rear end during acceleration. This adjustment is effective for reducing rear grip, which can be advantageous in certain driving conditions. By utilizing this stiffer spring, drivers have the ability to fine-tune their car's handling characteristics.

The carbon fiber center diff mount plate not only reduces weight on your vehicle but also enhances the rigidity and efficiency of the braking system.

Crafted from 7075-T6 alloy, these washers offer superior durability compared to the plastic ones provided in the kit, thanks to their hard coating.

These 7075-T6 spacers serve as replacements for the plastic ones included in the kit. Offering a longer lifespan compared to their plastic counterparts, they effectively maintain smooth servo saver movement even under the load exerted by the steering links.

The 0.9mm spring offers a softer tension compared to the standard IFB8 kit clutch spring (1.0mm), effectively smoothing out power delivery when necessary.

Made from 7075-T6 alloy, these parts increase the stiffness of your radio plate and avoid undesired movements of your servors ensuring the maximum precision from your car.

The 7.0T front shock spring provides a marginally softer suspension than the stock spring (6.67T), strategically enhancing front-end grip. This adjustment is particularly advantageous on dusty and loamy track surfaces, where increased traction is essential for optimal performance.

The 25T throttle servo horn, crafted from 7075-T6 alloy, serves as an ideal replacement for the plastic counterpart provided in the kit. Its robustness and precision enable maximum performance from your brakes, while the minimized play between the servo horn and servo ensures precise control over your engine.

The 1.1mm spring provides a firmer tension compared to the standard IFB8 kit clutch spring (1.0mm), enabling the clutch to engage at higher RPM and enhancing engine bottom-end power, particularly on high-traction tracks.