R0417 - ALU CHASSIS STIFFENER R (IF18-3)

Prevents the side belt from falling off when a heavy load is applied to it.

An all new front one way set featuring larger one way bearings for improved durability. The timing of the drive transmission to the front tires has also been changed resulting in milder and more easy to drive characteristics. The overall weight has been reduced to 24g, 4g lighter than the original.

Brake pads that can be used with IF15-2/2W and IF18-3.
Compared to the standard soft (red), this pad enhances initial braking, allowing you to tune your preferred feeling when entering the corner.
By mixing this pad with the standard (soft (red)), you can create an intermediate feeling.
(There is an identification marking on one side, apply adhesive to this side only)

Lightweight and strong 64 titanium material is precision-machined to increase the overall length and ensure rigidity even when the rear upper arm is set at its longest setting. (Use with R0343 is recommended)

Regular weight lip spoiler for 1/8 racing car body made of 0.8mm thick material. Includes a scale that is useful for precisely setting the lip spoiler height.
Compared to the light weight (R0284C), the lip spoiler itself is more rigid, enabling it to transfer downforce to the car body more effectively even at high speeds.

New 0.8 module spur gear designed for high precision, high strength, and high durability. Gear specifications have been redesigned to provide uniform backlash for all tooth number combinations. The tooth width of the 2nd gear spur gear (R0409T56-T58) has been increased by approximately 12% to achieve even higher strength and durability. *Cannot be used in combination with conventional 0.8 module spur gears (R0247-60-62 and R0248-56-58) to prevent gear breakage. *Pinion gears for IF18-3 (R0384T18, R0384T19, R0385T23, R0385T24) must be used.

New stabilizer stopper for IF18-3 front stabilizer.
By making the contact surface with the bearing spherical, smoother movement of the stabilizer is acheived.
Durability has also been greatly improved by using steel.
Available in 2.3, 2.5, and 2.7mm.

Compatible stabilizers
Stopper 2.3mm (R0382S23): 2.0mm, 2.1mm, 2.2mm, 2.3mm
Stopper 2.5mm (R0382S25): 2.4mm, 2.5mm
Stopper 2.7mm (R0382S27): 2.6mm, 2.7mm

New 0.8 module spur gear designed for high precision, high strength, and high durability. Gear specifications have been redesigned to provide uniform backlash for all tooth number combinations. The tooth width of the 2nd gear spur gear (R0409T56-T58) has been increased by approximately 12% to achieve even higher strength and durability. *Cannot be used in combination with conventional 0.8 module spur gears (R0247-60-62 and R0248-56-58) to prevent gear breakage. *Pinion gears for IF18-3 (R0384T18, R0384T19, R0385T23, R0385T24) must be used.

3.0mm shorter/Good matching for standard INFINITY(CM-00001)

NEW Option part for IF18.
Insert under front bumper to adjust body height where needed.
Ideal when running on bumpy race tracks.
Will offer a smoother driving feel.
Includes M4mm Aluminium Nylon Nut & M4x12mm Titanium Flat Head Screw.