R0272 - VENTILATED BRAKE DISC SET

An all new front one way set featuring larger one way bearings for improved durability. The timing of the drive transmission to the front tires has also been changed resulting in milder and more easy to drive characteristics. The overall weight has been reduced to 24g, 4g lighter than the original.

A brass battery plate that concentrates the weight in the center of the car body and increases the chassis rigidity achieves higher driving stability. In particular, it is easy to control on a high-grip road surface and prevents traction roll.

Regular weight lip spoiler for 1/8 racing car body made of 0.8mm thick material. Includes a scale that is useful for precisely setting the lip spoiler height.
Compared to the light weight (R0284C), the lip spoiler itself is more rigid, enabling it to transfer downforce to the car body more effectively even at high speeds.

High-precision machined aluminum spring guide for improved steering response and rear traction. Hard coating is applied to ensure durability of the contact area with the spring and to maintain good condition for a long period of time.

High-precision machine cut of 7075 aluminum material. Compared with the standard brake lever in the kit it features two mounting positions of different lengths, allowing for stronger braking force and excellent control.

A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.

By installing this Front Carbon Wheel Plate on the front knuckle, turbulent air generated in the front wheels during driving is cleaned up offering more stable driving characteristics. The effect is especially noticeable on high-speed circuits.

A carbon stiffener that can be added to the front lower arm to increase rigidity. Increased steering response and higher cornering speeds can be achieved in certain conditions. Its also possible to adjust the flex and rigidity by the number of mounting screws used.

A new aluminium servo horn designed specifically for IF18. 23T specification for servos made by Sanwa and KO. By making the shape of the arm offset it is possible to achieve the maximum steering angle with a linear steering operation. Use in combination with R0259 Aluminium servo saver (up side).

A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.