


This is a 9.5g chassis weight for IF15. By combining it with 14g and 28 chassis weights, the option parts already available, you can make finer tune-up.
This is an upgraded version of IF15front one-way set. By replacing the bevel gear with the newly-designed one-way plate, The one way dampening effect can be better controlled. In addition, this set enables the operation to be more stable for a longer period of time. Silicone oil of a part number between 100000 and 500000 and rubber glue or silicon sealing agent are required for assembly.
Features the same design shape as G154 rear shock tower (standard / carbon)
but designed to be used in combination with a specially developed short type shock.
The total shock length is shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
The body mount is 3.5 mm lower (one step of the body pin), which also contributes to lowering the center of gravity.
The shock mounting positions have been optimised to only the three inner positions, allowing for extra strength in this area in the event of a crash.
R0262, R0263 Repair parts for accessories. 1mm short type "G084 BALL NUT 4.9 mm", they can be used for height adjustment of each pivot part of IF15.
This is a spare part for the G0125 B adjustable front one-way set. This set helps control the one-way well even with soft silicone oil. We also recommend replacing the conventional one with this spare part.
Lowered shock tower for mounting short shock to IF15-2. As with the standard type, the damper mounting angle can be selected from 4 locations. Due to the lowered tower, the damper is 4mm shorter, offering a lower center of gravity. It is possible to enhance steering response and tune setup to your prefered driving feel. (Please use together with G147 short shock set)
IF15/IF15Wに使用可能なショートショック専用のセッティングパーツ。
標準で付属の
2個穴-1.1mmピストンに対して
1個穴-1.3mmピストンはIF18-2のフロント用ピストンと同一サイズ、他に
3個穴-0.9mmピストンのタイプ(G124と同一サイズ)も発売。
ピストンの固定方法をIF14-2同様に極小のビスを採用し、ストロークを確保。
(専用の0.05インチサイズの工具が必要です。→[A0100] INFINITY 0.05" HEX WRENCH DRIVER )
A high-quality 64 titanium ball screw set, when replacing the kit's standard φ8mm ball screws (front/steel, rear/aluminum), they reduce overall weight by approximately 3.3g and provides a light driving feel.
These 64 titanium ball screws are approximately 1.5 g lighter per piece than the kit's standard parts for the front (made of steel). This material change slightly reduces rigidity for a smoother feel.
Replacement parts for G125 Adjustable front one way set. For use when cup and shaft see general wear and tare.
This is a 9.5g chassis weight for IF15. By combining it with 14g and 28 chassis weights, the option parts already available, you can make finer tune-up.