This is an upgraded version of IF15front one-way set. By replacing the bevel gear with the newly-designed one-way plate, The one way dampening effect can be better controlled. In addition, this set enables the operation to be more stable for a longer period of time. Silicone oil of a part number between 100000 and 500000 and rubber glue or silicon sealing agent are required for assembly.
Special rubber with excellent durability is used to achieve longer life than the soft rubber type of the kit's standard parts. Especially effective for IF15W with high grip wide tires.
Pinion gear with improved durability compared to the standard part, achieved by reviewing the material and coating.
Steering knuckle plate for IF15-2 and IF15-2W, which allows for a greater steering angle of the outer tire in corners than the standard kit version.
This will make tighter cornering possible, and can improve high speed steering on larger tracks.
In order to efficiently draw out the power of the OS MAX 12TG, which is popular in Japan for its easy power, it has a lightweight flywheel and optimized weight for efficient power delivery. The specifications of each part, such as the yellow shoe, which has been processed to a thin 4mm thickness, have been determined in advance.
The use of 7075-T6 material and its slim profile make it both lightweight and highly rigid. Securely fastens the main chassis to the upper deck for more stable running on all surfaces.
IF15/IF15Wに使用可能なショートショック専用のセッティングパーツ。
標準で付属の
2個穴-1.1mmピストンに対して
1個穴-1.3mmピストンはIF18-2のフロント用ピストンと同一サイズ、他に
3個穴-0.9mmピストンのタイプ(G124と同一サイズ)も発売。
ピストンの固定方法をIF14-2同様に極小のビスを採用し、ストロークを確保。
(専用の0.05インチサイズの工具が必要です。→[A0100] INFINITY 0.05" HEX WRENCH DRIVER )
"Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving."
Lowered shock tower for mounting short shock to IF15-2. As with the standard type, the damper mounting angle can be selected from 4 locations. Due to the lowered tower, the damper is 4mm shorter, offering a lower center of gravity. It is possible to enhance steering response and tune setup to your prefered driving feel. (Please use together with G147 short shock set)
Spare parts for repairing short shocks that can be used for IF15/IF15W.
Dedicated one O-ring specification.
The overall length has been reduced to the utmost limit to achieve a low center of gravity.
Teflon coated surface for smooth operation.
The combination of carbon and aluminum materials provides sharp steering characteristics with a highly rigid and lightweight finish. In addition, the included 4.9mm ball and aluminum spacer optimize bump steer and increase corner speed.
This is a 9.5g chassis weight for IF15. By combining it with 14g and 28 chassis weights, the option parts already available, you can make finer tune-up.
The use of lightweight titanium screws inside the two-speed unit contributes to improved engine pickup. The screw head is shaped to achieve the lightest weight possible.
Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving.
Please apply grease to the screw tightening areas when assembling in cold temperature environments.
This is an upgraded version of IF15front one-way set. By replacing the bevel gear with the newly-designed one-way plate, The one way dampening effect can be better controlled. In addition, this set enables the operation to be more stable for a longer period of time. Silicone oil of a part number between 100000 and 500000 and rubber glue or silicon sealing agent are required for assembly.
