In order to efficiently draw out the power of the OS MAX 12TG, which is popular in Japan for its easy power, it has a lightweight flywheel and optimized weight for efficient power delivery. The specifications of each part, such as the yellow shoe, which has been processed to a thin 4mm thickness, have been determined in advance.
This is an option part for short shock for IF15/IF15W. 3 hole - 0.9mm piston. (3 hole - 0.9mm and 2 hole - 1.1mm piston is also available.
This piston is secured with an ultra small screw as used in the IF14-2 to increase stroke.
A dedicated 0.05" inch size tool is required. (A0100) INFINITY 0.05" hex wrench driver.
Pinion gear with improved durability compared to the standard part, achieved by reviewing the material and coating.
These 64 titanium ball screws are approximately 1.5 g lighter per piece than the kit's standard parts for the front (made of steel). This material change slightly reduces rigidity for a smoother feel.
"Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving. """
Pinion gear with improved durability compared to the standard part, achieved by reviewing the material and coating.
Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving.
"Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving."
Lowered shock tower for mounting short shock to IF15-2. As with the standard type, the damper mounting angle can be selected from 4 locations. Due to the lowered tower, the damper is 4mm shorter, offering a lower center of gravity. It is possible to enhance steering response and tune setup to your prefered driving feel. (Please use together with G147 short shock set)
Features the same design shape as G154 rear shock tower (standard / carbon)
but designed to be used in combination with a specially developed short type shock.
The total shock length is shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
The body mount is 3.5 mm lower (one step of the body pin), which also contributes to lowering the center of gravity.
The shock mounting positions have been optimised to only the three inner positions, allowing for extra strength in this area in the event of a crash.
Wheel shaft for IF15-2 with a hybrid structure of hard-anodized A7075 for the main body and titanium for the axle shaft threads, achieving a high level of strength and weight reduction.
Weight reduction of 1.9g compared to the normal steel (4.5g); about 10g reduction in rotating mass for one unit.
