G260 - TG CLUTCH SET (for OS 12TG)

Spare part for G260

Repair parts for G236

Optimized shape to accommodate the updated thickness of (G187) front knuckle plate (hard) adopted on IF15-2. Additionally, reducing the clearance of the opening compared to the original product to efficiently control the airflow, which is the original purpose of the knuckle plate.

Wheel shaft for IF15-2 with a hybrid structure of hard-anodized A7075 for the main body and titanium for the axle shaft threads, achieving a high level of strength and weight reduction.
 Weight reduction of 1.9g compared to the normal steel (4.5g); about 10g reduction in rotating mass for one unit.

Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving.

Please apply grease to the screw tightening areas when assembling in cold temperature environments.

This shock tower is used in combination with a specially developed short-type shock.
The suspension stroke is equal to that of the standard type, and combined with the low center of gravity, the shocks provide increased response and cornering.
The front and rear mounting positions are also carefully designed to keep the upper and lower mounting surfaces the same.
The upper fixing surface is offset by 1mm to keep the upper and lower mounting surfaces the same, the shape takes advantage of the machined A7075 material.

In the case of use with IF15W the racing body SMJ C235 can be optimized and mounted 3.5mm lower when using G147 short front shock set.

Prevents the side belt from falling off when a heavy load is applied to it.

This is an option part for short shock for IF15/IF15W. 3 hole - 0.9mm piston. (3 hole - 0.9mm and 2 hole - 1.1mm piston is also available.

This piston is secured with an ultra small screw as used in the IF14-2 to increase stroke.

A dedicated 0.05" inch size tool is required. (A0100) INFINITY 0.05" hex wrench driver.

Firmly fixing both ends of the upper suspension shaft with an E-ring and a stopper gives you added security from vibrations during long finals.

Features the same design shape as G154 rear shock tower (standard / carbon)
but designed to be used in combination with a specially developed short type shock.
The total shock length is shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
The body mount is 3.5 mm lower (one step of the body pin), which also contributes to lowering the center of gravity.

The shock mounting positions have been optimised to only the three inner positions, allowing for extra strength in this area in the event of a crash.

Spare part for G260