G152 - SHORT SHOCK SHAFT (24mm/2pcs)

This new aluminium center bulkhead ensures chassis rigidity in the center section of the car. Helps with traction and added stability in high grip situations.

Firmly fixing both ends of the upper suspension shaft with an E-ring and a stopper gives you added security from vibrations during long finals.

This shock tower is used in combination with a specially developed short-type shock.
The suspension stroke is equal to that of the standard type, and combined with the low center of gravity, the shocks provide increased response and cornering.
The front and rear mounting positions are also carefully designed to keep the upper and lower mounting surfaces the same.
The upper fixing surface is offset by 1mm to keep the upper and lower mounting surfaces the same, the shape takes advantage of the machined A7075 material.

In the case of use with IF15W the racing body SMJ C235 can be optimized and mounted 3.5mm lower when using G147 short front shock set.

This is an upgraded version of IF15front one-way set. By replacing the bevel gear with the newly-designed one-way plate, The one way dampening effect can be better controlled. In addition, this set enables the operation to be more stable for a longer period of time. Silicone oil of a part number between 100000 and 500000 and rubber glue or silicon sealing agent are required for assembly.

Lowered shock tower for mounting short shock to IF15-2. As with the standard type, the damper mounting angle can be selected from 4 locations. Due to the lowered tower, the damper is 4mm shorter, offering a lower center of gravity. It is possible to enhance steering response and tune setup to your prefered driving feel. (Please use together with G147 short shock set)

Repair parts for G236

A high-quality 64 titanium ball screw set, when replacing the kit's standard φ8mm ball screws (front/steel, rear/aluminum), they reduce overall weight by approximately 3.3g and provides a light driving feel.

Improved rigidity by using carbon-mixed nylon material. Improves steering response and enables increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, ""H"" mark is printed by laser engraving.

Oversized wheel hubs to better fit tires with large wheel hex mounting. Prevents misalignment and increases wheel stability. (Matrix tires recommended).

Features the same design shape as G154 rear shock tower (standard / carbon)
but designed to be used in combination with a specially developed short type shock.
The total shock length is shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
The body mount is 3.5 mm lower (one step of the body pin), which also contributes to lowering the center of gravity.

The shock mounting positions have been optimised to only the three inner positions, allowing for extra strength in this area in the event of a crash.

New rear shock tower features a body mounting position 3.5mm lower than std, contributing to a lower center of gravity.
By using T266 Alu HBP mount (black/2pcs) it is also possible to utilize horizontal style body mounting style.
The shock mounting positions have been reduced to 3 offering increased strength and crash resistance.

IF15/IF15Wに使用可能なショートショック専用のセッティングパーツ。
標準で付属の
2個穴-1.1mmピストンに対して
1個穴-1.3mmピストンはIF18-2のフロント用ピストンと同一サイズ、他に
3個穴-0.9mmピストンのタイプ(G124と同一サイズ)も発売。

ピストンの固定方法をIF14-2同様に極小のビスを採用し、ストロークを確保。
(専用の0.05インチサイズの工具が必要です。→[A0100] INFINITY 0.05" HEX WRENCH DRIVER　)

Special rubber with excellent durability is used to achieve longer life than the soft rubber type of the kit's standard parts. Especially effective for IF15W with high grip wide tires.