G148 - SHOCK PISTON (φ1.3x1Hole/2pcs)

Features the same design shape as G154 rear shock tower (standard / carbon)
but designed to be used in combination with a specially developed short type shock.
The total shock length is shortened by 4 mm.
The suspension stroke is maintained the same as the std shock type, and combined with the lower center of gravity, this offers sharper cornering and increased reaction.
The body mount is 3.5 mm lower (one step of the body pin), which also contributes to lowering the center of gravity.

The shock mounting positions have been optimised to only the three inner positions, allowing for extra strength in this area in the event of a crash.

In order to efficiently draw out the power of the OS MAX 12TG, which is popular in Japan for its easy power, it has a lightweight flywheel and optimized weight for efficient power delivery. The specifications of each part, such as the yellow shoe, which has been processed to a thin 4mm thickness, have been determined in advance.

Spare part for G272.

G121-14 Chassis weight is 14g, half that of G0121 original optional chassis weight. Perfect for making finer setting adjustments. Can be used in all sliding weight positions and front bumper on IF15.

This new aluminium center bulkhead ensures chassis rigidity in the center section of the car. Helps with traction and added stability in high grip situations.

Special rubber with excellent durability is used to achieve longer life than the soft rubber type of the kit's standard parts. Especially effective for IF15W with high grip wide tires.

A high-quality 64 titanium ball screw set, when replacing the kit's standard φ8mm ball screws (front/steel, rear/aluminum), they reduce overall weight by approximately 3.3g and provides a light driving feel.

Wheel shaft for IF15-2 with a hybrid structure of hard-anodized A7075 for the main body and titanium for the axle shaft threads, achieving a high level of strength and weight reduction.
 Weight reduction of 1.9g compared to the normal steel (4.5g); about 10g reduction in rotating mass for one unit.

Spare parts for repairing short shocks that can be used for IF15/IF15W.

Dedicated one O-ring specification.
The overall length has been reduced to the utmost limit to achieve a low center of gravity.
Teflon coated surface for smooth operation.

Steering knuckle plate for IF15-2 and IF15-2W, which allows for a greater steering angle of the outer tire in corners than the standard kit version.
This will make tighter cornering possible, and can improve high speed steering on larger tracks.

This is an option part for short shock for IF15/IF15W. 3 hole - 0.9mm piston. (3 hole - 0.9mm and 2 hole - 1.1mm piston is also available.

This piston is secured with an ultra small screw as used in the IF14-2 to increase stroke.

A dedicated 0.05" inch size tool is required. (A0100) INFINITY 0.05" hex wrench driver.

"Improved rigidity by using carbon-mixed nylon material. Stabilizes the rear grip and allows for increased racing line stability. It is particularly effective when used under high temperature conditions. *For identification, the ""H"" mark is printed by laser engraving. """

Pinion gear with improved durability compared to the standard part, achieved by reviewing the material and coating.

These titanium ball screws contribute to improved grip by adding approximately 0.6 g of weight per ball screw compared to the kit's standard rear ballscrews (made of aluminum). In addition, the use of 64 titanium material with its increased rigidity improves response, especially on low to medium grip surfaces.

This is a spare part for the G0125 B adjustable front one-way set. This set helps control the one-way well even with soft silicone oil. We also recommend replacing the conventional one with this spare part.