T256 - FLOATING ELECTRONIC PLATE MOUNT (Black)
Spare part for floating electronic plate set. The plate can also function as a center chassis stiffener by adding one more screw to the chassis.
16 other products in the same category:
T101 - ALU HEX WHEEL HUB (4.25mm/Black/2pcs)
0.75mm thinner than kit normal(5mm). Usefull to make the width narrow.
T358 - GRAPHITE FRONT BODY UPSTOP SET
By mounting the body as close as possible without causing contact between the body and tires, you can improve steering characteristics and stability of the car in high-speed corners.
T200-0.2 - LOWER SUSPENSION BLOCK SPACER RF 0.2mm (SUS/4pcs)
This spacer sits between the lower suspension block and the chassis to adjust the roll center. With a thickness of 0.2mm it's possible to achieve fine detailed setup.
T100 - ALU HEX WHEEL HUB (4.5mm/Black/2pcs)
0.5mm thinner than kit normal(5mm). Usefull to make the width narrow.
T268 - REAR BODY HEIGHT FITTER (for HBP)
When using the HBP mount it can be difficult to accurately position the rear body post holes in the bodyshell. By using this rear body height fitter it is quick and easy to precisely position the body post holes at the desired body height.
T308SH - STEERING BLOCK / REAR UPRIGHT SET (IF14-2/Super Hard)
One car set of steering block and rear uprights (graphite/super hard) for IF14-2 and IF14-2FWD.
This set is useful when changing from the kit's standard hardware, or when you want to replace these parts together for maintenance. It is also more economical than purchasing each item individually.
T274 - ULTRA LOW FRICTION LOWER ARM OUTER SHAFT (Rear/2pcs)
High precision and high strength stainless steel lower arm shafts plated with a special lubricant to reduce resistance and provide ultra smooth suspension movement. Offers ultimate suspension performance.
Spare part for floating electronic plate set. The plate can also function as a center chassis stiffener by adding one more screw to the chassis.