B01410U-T - M4x10mm TITANIUM UFO HEAD SCREW (6pcs)

This Alu super flex chassis offers a softer flex characteristic than the regular flex aluminium chassis (T234-F). The chassis is about 7g lighter than the std flex Alu chassis and is suitable for low traction carpet tracks, indoor asphalt tracks and med-high traction outdoor asphalt conditions.

Lightweight DJ CVD joint that is approx 1.2g lighter than standard steel (approx 1.8g) by using lightweight and high strength super duralium (A7075). Throttle response is improved by reducing the rotating mass, while front tyre wear and understeer is reduced.

Standard spur gear of the IF14-2 kit.

It is preventable G-Clip accidentally comming off during running.
Its approx. of 0.2mm thickness provide no weight extendability.
Shutterproof of grease and lenghtening life-span of the parts and maintenance cycle.
Cut about 10mm for each. Fitting on effectively, provide little heating after inserted.

Short type (41mm) front drive shaft rather than the kit standard front drive shaft (42mm).
Offers a linear steering feel, making the car easier to drive when used in high traction or oversteer situations.

Standard part for T265.

Newly designed rear upright, geometry of suspension system is optimized. Toe angle is zero.
Mounting position of upper arm is optimized at higher point, shim of 2.0mm to be reduced.
Lineup of Hard & Graphite material. Hard material suits for fundamental condition and provides stable grip.
For high grip surface and expecting quick response, graphite material is recommended to use.

Spare Part for IF14-2 Team Edition

Adjust the chassis flex by connecting this carbon brace between the upper bulkheads on top of the top deck. This upper bulkhead brace is cut with high precision from 1mm carbon plate and can change the steering and traction characteristics by effecting the rigidity of the front or rear bulkheads.

Front of top deck: High-speed corner steering is increased. Low-speed corner steering decreased.
Rear of top deck: Increased rotation in the rear. Understeer is reduced. On power traction slightly reduced.