F072 - ALU CAMBER BUSHING (2dot / 4pcs)
Precisely machined from extremely strong 7075-T6 Aluminium this camber adjustment eccentric bushing can be used to adjust the camber angle at 0.5 degree or 2 degrees.
F063 - GRAPHITE FRONT UPPER ARM (2mm Wide)
By using this graphite front arm, the front track width will be increased by 4mm (2mm each side) making driving on high-grip tracks more stable. Make sure to use F064 in combination with F063.
16 other products in the same category:
F073 - ALU CASTER BUSHING (1dot / 3pcs)
Precisely machined from extremely strong 7075-T6 Aluminium this caster adjustment eccentric bushing can be used to adjust the caster angle at 6 degrees or 9 degrees.
CM-A001-375 - SILICONE SHOCK OIL 375 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
F070 - DIFF CARBON REAR AXLE (Black)
This carbon rear axle for the IF11 ball differentials greatly improves throttle responses, especially on high-grip tracks.
CM-A001-475 - SILICONE SHOCK OIL 475 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
CM-A001-700 - SILICONE SHOCK OIL 700 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
R0329L30 - SHOCK SHAFT TITANIUM 30mm 2pcs
The material and coating have been updated to significantly improve crash resistance and durability compared to the standard items. The shaft is highly durable and resistant to scratches even after long periods of use.
F066 - RIDE HEIGHT ADJUST ALU WASHER 0.5mm (Silver/10pcs)
0.5mm aluminium washer for use with F065 axle height adjuster to set rear ride height.
F065 - ALU AXLE HEIGHT ADJUSTER SET (Black/incl.Washer)
These aluminium axle height adjusters for the IF11 allow you to easily adjust the rear end ride height of your car for all conditions and tyre types. Used together with CM-A004-03 shim set you can adjust the height in increments of 0.1mm.
CM-A001-600 - SILICONE SHOCK OIL 600 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
CM-A001-300 - SILICONE SHOCK OIL 300 (60cc)
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
By using this graphite front arm, the front track width will be increased by 4mm (2mm each side) making driving on high-grip tracks more stable. Make sure to use F064 in combination with F063.