• New

G210BK - BRAKE PAD BLACK (IF15-2)

Brake pads that can be used with IF15-2/2W and IF18-3.
Compared to the standard soft (red), this pad enhances initial braking, allowing you to tune your preferred feeling when entering the corner.
By mixing this pad with the standard (soft (red)), you can create an intermediate feeling.
(There is an identification marking on one side, apply adhesive to this side only)

16 other products in the same category:

  • New

F116 - HYBRID STEERING KNUCKLE (3mm Trail)

Hybrid type with titanium axle shafts and duralumin steering knuckles.

Mild steering characteristics are achieved by setting the amount of trail at 3mm.

The thickness of the steering knuckle is 6mm, which allows for a wider range of ride height adjustment.

  • New

M170 - CVA CUP SHAFT (ALU/2pcs)

This component is crafted from 7075-T6 alloy and features a hard coating. Its lightweight design (4.3 grams compared to the steel version's 8.3 grams) allows you to save weight and achieve maximum performance. It can also be installed on the rear hub. Using the M170 on the rear end of your vehicle provides additional support, which is recommended for high-grip and fast tracks.

  • New

R0382S25 - SWAY BAR STOPPER 2.5mm (IF18-3/2pcs)

New stabilizer stopper for IF18-3 front stabilizer.
By making the contact surface with the bearing spherical, smoother movement of the stabilizer is acheived.
Durability has also been greatly improved by using steel.
Available in 2.3, 2.5, and 2.7mm.

Compatible stabilizers
Stopper 2.3mm (R0382S23): 2.0mm, 2.1mm, 2.2mm, 2.3mm
Stopper 2.5mm (R0382S25): 2.4mm, 2.5mm
Stopper 2.7mm (R0382S27): 2.6mm, 2.7mm

  • New

G286 - STAINLESS REAR STIFFENER SET(IF15-2)

Mounted in the opening at the rear of the main chassis, it increases chassis rigidity at the rear end of the chassis and increases weight by approximately 13g to ensure stable rear grip. It is also effective when the track surface is high grip and traction roll occurs.
Use with G230 Carbon Rear Stiffener Set to expand the range of setting.

  • New

M157 - SERVO HORN STEERING 23T (ALU)

The 23T steering servo horn, crafted from 7075-T6 alloy, offers exceptional robustness and precision. Featuring an M2 screw lock, it virtually eliminates play between the servo horn and servo, resulting in heightened steering precision and responsiveness.

F114 - ALU FRONT BODY POST/WING MOUNT

When removing and attaching the front wing, it is no longer necessary to remove the upper monocoque, allowing for smooth wing replacement. Additionally, since it also serves as a front body post mount, the position of the body post does not change depending on the type of wing, making it convenient.