G270-16 - 1st PINION GEAR 16T (7075/IF15-2)

Repair parts for R0394

This part is crafted from 7075-T6 alloy, significantly enhancing the stiffness of the central diff mounting. Additionally, it improves heat dissipation and facilitates a smoother transmission, resulting in enhanced performance.

In addition to the conventional 9, 10, and 11mm, the new 8mm is now available as a set with the necessary parts for installation!
 By using 8mm, the outer wheel has more angle allowing for a wider range of settings.
 R0259 Aluminum Servo Saver Set (top mount) is required.

The 9.0T rear spring represents a significant increase in stiffness compared to the stock spring (10.0T), providing enhanced support to the rear end during acceleration. This adjustment is effective for reducing rear grip, which can be advantageous in certain driving conditions. By utilizing this stiffer spring, drivers have the ability to fine-tune their car's handling characteristics.

By greatly increasing rigidity in the rear section of the  chassis, the car's turning ability is noticeably reduced, making it easier to manoeuvre on extremely low-grip surfaces or high-grip surfaces where traction roll could be a problem.

This wider wheel hex modifies the vehicle's handling characteristics by altering steering feel and vehicle roll stiffness. It is versatile for use on both the front and rear ends, enabling smoother steering when mounted at the front and improved traction when mounted at the rear.

The carbon fiber center diff mount plate not only reduces weight on your vehicle but also enhances the rigidity and efficiency of the braking system.

Developed for the 2022 IFMAR World Championship with direct input and test information gathered by Infinity team drivers.
Major spare parts and optional parts are the same as IF14-2.