T354 - ALU REAR LOWER SUSPENSION HOLDER -RIGHT 44.5mm

Repair parts for R0394

The 9.0T rear spring represents a significant increase in stiffness compared to the stock spring (10.0T), providing enhanced support to the rear end during acceleration. This adjustment is effective for reducing rear grip, which can be advantageous in certain driving conditions. By utilizing this stiffer spring, drivers have the ability to fine-tune their car's handling characteristics.

The shock tower Ver.B is made up after continuous feedback from Team INFINITY drivers in the worlds
Newly designed shock positions will provide you stable grip balance in various condition.
Perfectly suitable when you like to make the driving feel milder than kit normal.

Newly designed rear upright, geometry of suspension system is optimized. Toe angle is zero.
Mounting position of upper arm is optimized at higher point, shim of 2.0mm to be reduced.
Lineup of Hard & Graphite material. Hard material suits for fundamental condition and provides stable grip.
For high grip surface and expecting quick response, graphite material is recommended to use.

Approx. of 13g heavy weight than kit normal carbon graphite chassis. Suitable for the car to make more lower gravity center like carpet or high-grip surface.
Optimized chassis shape design will provide perfect chassis flex.

Brake pads that can be used with IF15-2/2W and IF18-3.
Compared to the standard soft (red), this pad enhances initial braking, allowing you to tune your preferred feeling when entering the corner.
By mixing this pad with the standard (soft (red)), you can create an intermediate feeling.
(There is an identification marking on one side, apply adhesive to this side only)

Crafted from 7075-T6 alloy, these washers offer superior durability compared to the plastic ones provided in the kit, thanks to their hard coating.

Reviewed steering angle, front D.J.CVD drive shaft.
With use of aluminum bell crank (T093), smoothly can provide the drive power at wide steering angle.
Assemblage of wheel axle and drive shaft must be Ver.2 -to-Ver.2

A new #30000, #40000 and #50000 has been added to the INFINITY silicon shock oil series.
This allows for a wider range of settings in all categories.

In order to efficiently draw out the power of the OS MAX 12TG, which is popular in Japan for its easy power, it has a lightweight flywheel and optimized weight for efficient power delivery. The specifications of each part, such as the yellow shoe, which has been processed to a thin 4mm thickness, have been determined in advance.