- New


1/10 GP Touring Car World Championship
At the 2018 IFMAR 1/10 GP Touring Car World Championship (1/10 IC Track), five cars made it to the A main final, qualifying TQ and winning the championship. Four years after that amazing debut, at the 2022 IFMAR World Championship, nine IF15 prototypes made it to the A main final, qualifying TQ, Superpole, and winning, proving their overwhelming potential. The IF15 prototypes that achieved these amazing results are finally being made commercially available as the IF15-2!
The IF15-2, the most advanced 1/10 GP touring car in history and will take your racing to new heights!
Let's aim for the top together!
The drivetrain of the IF18-3 has been lightened to improve response during acceleration and deceleration.
The weight is approximately 7g lighter than the 8mm shaft.
The 25T throttle servo horn, crafted from 7075-T6 alloy, serves as an ideal replacement for the plastic counterpart provided in the kit. Its robustness and precision enable maximum performance from your brakes, while the minimized play between the servo horn and servo ensures precise control over your engine.
A new #30000, #40000 and #50000 has been added to the INFINITY silicon shock oil series.
This allows for a wider range of settings in all categories.
Brake pads that can be used with IF15-2/2W and IF18-3.
Compared to the standard soft (red), this pad enhances initial braking, allowing you to tune your preferred feeling when entering the corner.
By mixing this pad with the standard (soft (red)), you can create an intermediate feeling.
(There is an identification marking on one side, apply adhesive to this side only)
Spare parts fot T358.
Hex socket head screws machined from high-quality 6-4 titanium material.
With a larger head outer diameter (approximately 3.7mm) than the typical button head, they allow for secure fastening of parts.
Machined from 7075-T6 alloy, this part enhances strength and stiffness, surpassing the stock plastic component.
This component is crafted from 7075-T6 alloy and features a hard coating. Its lightweight design (4.3 grams compared to the steel version's 8.3 grams) allows you to save weight and achieve maximum performance. It can also be installed on the rear hub. Using the M170 on the rear end of your vehicle provides additional support, which is recommended for high-grip and fast tracks.
This wider wheel hex modifies the vehicle's handling characteristics by altering steering feel and vehicle roll stiffness. It is versatile for use on both the front and rear ends, enabling smoother steering when mounted at the front and improved traction when mounted at the rear.
When removing and attaching the front wing, it is no longer necessary to remove the upper monocoque, allowing for smooth wing replacement. Additionally, since it also serves as a front body post mount, the position of the body post does not change depending on the type of wing, making it convenient.