M073 - REAR ARB SET (2.4/2.6/2.8mm)

The carbon fiber center diff mount plate not only reduces weight on your vehicle but also enhances the rigidity and efficiency of the braking system.

Revival of the plastic front body mounting plate that was a standard item on the INFINITY 1/8 racing first model and IF18. It subtly reduces the powerful front downforce from the body for smoother steering characteristics.

The new suspension holder provides 0.5mm lower than kit normal hinge pin point. Possible to lower the roll center. Combination of roll center and toe angle option, setting range is widen.

Spare part for G260

Mounted in the opening at the rear of the main chassis, it increases chassis rigidity at the rear end of the chassis and increases weight by approximately 13g to ensure stable rear grip. It is also effective when the track surface is high grip and traction roll occurs.
Use with G230 Carbon Rear Stiffener Set to expand the range of setting.

When removing and attaching the front wing, it is no longer necessary to remove the upper monocoque, allowing for smooth wing replacement. Additionally, since it also serves as a front body post mount, the position of the body post does not change depending on the type of wing, making it convenient.

Repair parts for R0400

Made of superior quality 1.6mm thickness of U.S.A. carbon material.
Compare with kit normal thickness 2.0mm, further chassis flex is gained and initial steering response can be increased.
Provides great efficiency use with optional Aluminum Flex Main Chassis(T109).

Spare part for G260