B02312 - M3x12mm FLAT HEAD SCREW (8pcs)

Spare part for G260

C-Hub set with added mounting holes for the body upstop (T358). Be sure to use T332B when using T358.
* The conventional T332 will be discontinued once the stock runs out.

The 6.33T front shock spring offers a slightly firmer suspension compared to the stock spring (6.67T). This adjustment serves to diminish front-end grip, resulting in a more forgiving driving experience.

Newly designed steering block. Steering angle stopper is additionally equipped.
Steering is adjustable at any angle of incidence. Lineup of Hard & Graphite material.
Hard material is suitable for fundamental condition and provides stable grip.
For high grip surface and expecting quick response, graphite material is recommended to use.

Machined from 7075-T6 alloy, this part enhances strength and stiffness, surpassing the stock plastic component.

Spare parts fot T358.
Hex socket head screws machined from high-quality 6-4 titanium material.
With a larger head outer diameter (approximately 3.7mm) than the typical button head, they allow for secure fastening of parts.

Pinion gear with improved durability compared to the standard part, achieved by reviewing the material and coating.

The 23T throttle servo horn, crafted from 7075-T6 alloy, serves as an ideal replacement for the plastic counterpart provided in the kit. Its robustness and precision enable maximum performance from your brakes, while the minimized play between the servo horn and servo ensures precise control over your engine.

In order to efficiently draw out the power of the OS MAX 12TG, which is popular in Japan for its easy power, it has a lightweight flywheel and optimized weight for efficient power delivery. The specifications of each part, such as the yellow shoe, which has been processed to a thin 4mm thickness, have been determined in advance.

Reviewed steering angle, front D.J.CVD drive shaft.
With use of aluminum bell crank (T093), smoothly can provide the drive power at wide steering angle.
Assemblage of wheel axle and drive shaft must be Ver.2 -to-Ver.2

Not only has rigidity been increased by using A7075, but the pivot height has been raised by 2mm compared to the standard part R300B/300H, providing more responsive steering and changing the camber change rate. To ensure clearance inside the wheel, the ball has been downsized from 8.5 to 8.0mm and the screw cap from 10 to 9mm and tilted by 10°. A specially prepared 8mm titanium ball is included to ensure proper steering angle. The main body is hard anodized.