


INFINITY Team Hoodie has been renewed with the World Champion "4 Star" design!
The "4 Star" design represents the number of World Championships Team INFINITY has won. The design is a subtle yet proud reflection of Team INFINITY's brilliant achievements to date. Although it is a thin type, it is brush lined for a comfortable feel and excellent warmth retention. Seven sizes are available: S/M/L/XL/2XL/3XL/4XL.
C-Hub set with added mounting holes for the body upstop (T358). Be sure to use T332B when using T358.
* The conventional T332 will be discontinued once the stock runs out.
Steering knuckle plate for IF15-2 and IF15-2W, which allows for a greater steering angle of the outer tire in corners than the standard kit version.
This will make tighter cornering possible, and can improve high speed steering on larger tracks.
By mounting the body as close as possible without causing contact between the body and tires, you can improve steering characteristics and stability of the car in high-speed corners.
The 9.0T rear spring represents a significant increase in stiffness compared to the stock spring (10.0T), providing enhanced support to the rear end during acceleration. This adjustment is effective for reducing rear grip, which can be advantageous in certain driving conditions. By utilizing this stiffer spring, drivers have the ability to fine-tune their car's handling characteristics.
Revival of the plastic front body mounting plate that was a standard item on the INFINITY 1/8 racing first model and IF18. It subtly reduces the powerful front downforce from the body for smoother steering characteristics.
INFINITY Team Hoodie has been renewed with the World Champion "4 Star" design!
The "4 Star" design represents the number of World Championships Team INFINITY has won. The design is a subtle yet proud reflection of Team INFINITY's brilliant achievements to date. Although it is a thin type, it is brush lined for a comfortable feel and excellent warmth retention. Seven sizes are available: S/M/L/XL/2XL/3XL/4XL.
R0342 is made with carbon mixed material to greatly increase the rigidity of the parts. The rear upper arm and wheel shaft support are more rigid, and rear traction is improved at all speeds.
Newly designed rear upright, geometry of suspension system is optimized. Toe angle is zero.
Mounting position of upper arm is optimized at higher point, shim of 2.0mm to be reduced.
Lineup of Hard & Graphite material. Hard material suits for fundamental condition and provides stable grip.
For high grip surface and expecting quick response, graphite material is recommended to use.
New stabilizer stopper for IF18-3 front stabilizer.
By making the contact surface with the bearing spherical, smoother movement of the stabilizer is acheived.
Durability has also been greatly improved by using steel.
Available in 2.3, 2.5, and 2.7mm.
Compatible stabilizers
Stopper 2.3mm (R0382S23): 2.0mm, 2.1mm, 2.2mm, 2.3mm
Stopper 2.5mm (R0382S25): 2.4mm, 2.5mm
Stopper 2.7mm (R0382S27): 2.6mm, 2.7mm