B01306ST - M3x6mm TITANIUM SLIM HEAD SCREW (4pcs)

The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.

Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.

DISCONTINUED

New 2018 T-shirt for INFINITY Team Drivers

The brushes have moderate hardness and are ideal for removing dirt and dust from chassis, body, and tires.
Three brush widths : 25mm (small), 38mm (medium), and 50mm (large). and Great value set of 3 pcs.

Body pins that have been pre bent for easy handling. Includes 2 types (4 each) with different bending directions so that you can choose the mounting direction. For body posts with a diameter of 6 mm

DISCONTINUED

Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.

Aluminum spacer with 0.75mm thickness added to the lineup. This allows for more precise setups. Silver color is used to easily distinguish them from 0.5mm and 1.0mm thickness spacers.

DISCONTINUED

New from Infinity is an original pit/cleaning towel. Known for their high quality production of towels they are made in Imabari Japan and offer extremely good water absorbency and a soft feel, great for all your pit/cleaning needs. Size: W1080mm x H205mm
The towels come in two different designs:
The IFS design is to commemorate the opening of the new INFINITY International Speedway Circuit in addition to the well know INFINITY designs. The IFS design will be limited and only available for sale at the INFINITY International Speedway Circuit.

The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.

DISCONTINUED

New 2018 T-shirt for INFINITY Team Drivers

A gauge that accurately measures the amount the clutch nut has been tightened. This enables quick and accurate clutch setting when driving at the circuit. The tip is a precision machined aluminum part that supports accurate measurements.

Slim head screw machined from high quality 64 titanium material. Replacing the steel slim head screws (B01308S) used to mount the rear chassis stiffener (T293) on the IF14-2FWD these will reduce weight and allow for fine chassis flex tuning. The wrench size used is 2.0 mm, and can also be tightened with a firm torque.

A vivid red anodized version has been added to the aluminum spacer series (3mm in inner diameter). It helps you dress up your machine. If you use this red anodized version and the black version in different specifications in a setting, you can easily distinguish them.

This parts case is convenient for storing small parts such as screws, washers and bearings. Comes with a set of label stickers that make it easy to identify the stored parts and remove them easily.