This multi-tool can be used to install and remove glow plugs (8mm sockets), flywheel nuts (10mm sockets), and cap screws (5mm hex wrenches) for the suspension balls on GP racing cars.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
DISCONTINUED
Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.
Aluminum end caps are now available to further enhance your Infinity Tool Series. The tool series which are already on the market feature high quality, cool appearance, excellent workability and comfort when working on your car. In addition to the bright red color with markings to recognize the type of tool at a glance, the cap is free to rotate when attached to the tool grip. This allows the user to hold the cap in the palm of the hand while turning the tool with the fingertips, enabling fine and continuous work.
By replacing the spacers in the front and rear of the lower suspension arms, the lower suspension arms will operate more smoothly, leading to improved traction.
Two types of spacers, 0.5mm and 1.0mm thick, are available.
A parts case that contains four plastic trays (outer dimensions 41x77x22mm).
Convenient for storing turnbuckles, rod ends, shocks, aluminum parts, etc.
Trolley bag with three drawers large enough to hold a 1/8 GP racing car. This carrying bag with casters is easy to move around even when storing all of your race cars, tools, spare parts, chargers, and other accessories. The cool design features the INFINITY logo in a bright racing rosso color. Main unit size: 55x31x48cm Internal drawer dimensions: 50x27x13cm
A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
Perfect for cutting RC bodyshells!
These curved scissors are ideal for cutting polycarbonate bodyshells. The curved cutting edge of these scissors makes it simple and easy to cut wheel arches. It is also possible to cut in a straight line using the same cutting edge.
A 30pcs pack of M3x6mm flat head titanium screws, as used in the Aluminum & Titainium screw sets. Precise 2mm hex hole size to reduce play when you insert the wrench, allowing you to tighten the screw firmly. A great value pack.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
Wheel reamer to widen the hole diameter of 1/8 GP racing car wheels to the optimum size.
If the wheel and axle shaft are too tight, it can cause problems such as not being able to install the wheel correctly or not being able to change tires efficiently during pit stops.
This wheel reamer is used by threading it through the hole in the wheel while turning it.
This multi-tool can be used to install and remove glow plugs (8mm sockets), flywheel nuts (10mm sockets), and cap screws (5mm hex wrenches) for the suspension balls on GP racing cars.
