The ultra-lightweight machined aluminum grip is finished perfectly with the Team INFINITY logo and black and red anodizing. The overall thickness and knurling position have been optimized to provide an excellent grip. The tip is made of carbide steel and is perfectly sized to fit each size of screw head, making it the world's top team spec tool.
Slim head screw machined from high quality 64 titanium material. Replacing the steel slim head screws (B01308S) used to mount the rear chassis stiffener (T293) on the IF14-2FWD these will reduce weight and allow for fine chassis flex tuning. The wrench size used is 2.0 mm, and can also be tightened with a firm torque.
Complete storage set; hard outer case and eight small cases with eight compartment. Comes with a set of label stickers for easy identification of stored parts.
The standard screws for the IF15 kit available in 6-10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
A new #30000, #40000 and #50000 has been added to the INFINITY silicon shock oil series.
This allows for a wider range of settings in all categories.
A new lineup of pinion gears for the IF18-2 with a hard coating on 7075 aluminium material. Offered in all teeth sizes to fine tune gear ratio according to the engine and track layout.
DISCONTINUED
Perfect for high speed refuelling. This fuel stick offers a wide cylinder to grip during refuelling, a carbon trigger and a guard to prevent accidental operation.
This tool enables you to cut and then easily chamfer the ends of plastic body posts up to 6mm in diameter.
Slim head screw machined from lightweight and highly rigid 64 titanium.
The screw features a straight/non threaded section at its base, which allows for precise installation of various parts.
Recommended for top deck and shock tower installation.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
This INFINITY oil bag is for storing silicon shock oil and silicon differential oil. With the black and red Team INFINITY colors and INFINITY logo on the top the bag is very stylish. You can also use this cloth bag for storing other RC goods.
Inside dimension: 19x15x10cm
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
Spare parts fot T358.
Hex socket head screws machined from high-quality 6-4 titanium material.
With a larger head outer diameter (approximately 3.7mm) than the typical button head, they allow for secure fastening of parts.
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.
Stainless steel shim with an inner diameter of 3 mm, outer diameter of 4 mm, and thickness of 0.1 mm.
The outer diameter is smaller than that of a standard shim while maintaining an inner diameter of 3 mm, allowing you to make adjustments to the clearance of shafts and other parts that were previously not possible.
The ultra-lightweight machined aluminum grip is finished perfectly with the Team INFINITY logo and black and red anodizing. The overall thickness and knurling position have been optimized to provide an excellent grip. The tip is made of carbide steel and is perfectly sized to fit each size of screw head, making it the world's top team spec tool.
