The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
The brushes have moderate hardness and are ideal for removing dirt and dust from chassis, body, and tires.
Three brush widths : 25mm (small), 38mm (medium), and 50mm (large). and Great value set of 3 pcs.
INFINITY silicone diff oil, formulated from pure silicone oil and carefully manufactured under strict viscosity control to provide the stability when making setup changes. Now available in 3000, 7000 and 9000 versions. The lineup now includes 3000 to 10000 in increments of 1000, allowing for finer tuning of the differential depending on track conditions.
We carefully selected pure silicon oils and mixed them to produce smooth operation and stable traction.
Viscosity is precisely controlled during production to make setting-up always accurate and stable.
DISCONTINUED
INFINITY 2018 Team "U.S.A." T-shirt (BK) M size
INFINITY 2018 Team "U.S.A." T-shirt (BK) L size
INFINITY 2018 Team "U.S.A." T-shirt (BK) XL size
INFINITY 2018 Team "U.S.A." T-shirt (BK) 2XL size
INFINITY 2018 Team "U.S.A." T-shirt (BK) 3XL size
Team Infinity T-shirt USA edition. As worn at the 2018 1/10GP Touring IFMAR World Championships.
A gauge that accurately measures the amount the clutch nut has been tightened. This enables quick and accurate clutch setting when driving at the circuit. The tip is a precision machined aluminum part that supports accurate measurements.
Aluminum end caps are now available to further enhance your Infinity Tool Series. The tool series which are already on the market feature high quality, cool appearance, excellent workability and comfort when working on your car. In addition to the bright red color with markings to recognize the type of tool at a glance, the cap is free to rotate when attached to the tool grip. This allows the user to hold the cap in the palm of the hand while turning the tool with the fingertips, enabling fine and continuous work.
The standard screws for the IF15 kit available in 6-10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
High-precision machined aluminum spacer with black color alumite treatment. Larger outer diameter (8 mm) than standard aluminum spacers makes them suitable for use in locations where large forces are applied.
Replacement for #R0209
Ensured stable damping force due to the original -blend silicone oils we highly selected. Since viscosity is professionally controlled and produced, it is always possible accurate and stable setting.
The standard screws for the IF15 kit available in 6-10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
Best suited double faced adhesive tape to attach RC devices such as receiver and speed controller onto objects. Appropriate flexibility to fit comfortably. Amazing compatibility of strong adhesion force and clear surface after peeling off. 20x100mm reed-shaped 4pcs. Thickness 0.75mm.
A plastic case that is convenient for storing and managing small parts such as shims and washers. A set of 7 in a 3 compartments case (76x24x17mm). The INFINITY shim set is recommended with an identification label sticker that matches this case. External dimensions: Approximately 86x179x20mm
DISCONTINUED
Team Infinity T-shirt USA edition. As worn at the 2019 IFMAR 1:8 ONROAD WORLD CHAMPIONSHIPS.
The screws and E-rings included in the IF18-2 kit are now available for sale as individual items. The screws used in the INFINITY kits are made of high strength steel and made in Japan. The fit when tightened is perfectly matched to the IF18-2. Recommended as standard and also setting parts.
The standard screws for the IF14-2 kit available in 10pcs packs. The screws used in all INFINITY kits are made of high performance steel and made in Japan. They are extremely stable and strong when tightened. Recommended not only as a spare part but also as a setting option.
