A floating electronics plate which allows the receiver, ESC and motor cooling fan to be easily installed and removed from the chassis. Helps ease of maintenance and allows for quicker chassis changes.

A floating electronics plate which allows the receiver, ESC and motor cooling fan to be easily installed and removed from the chassis. Helps ease of maintenance and allows for quicker chassis changes.

Spare part for floating electronic plate set. The plate can also function as a center chassis stiffener by adding one more screw to the chassis.

Spare part for floating electronic plate set.

An aluminum cooling fan mount that can be bolted to the floating electronic plate with a 30mm fan for motor cooling.

Brass battery holder weights designed for INFINITY IF14-2 to help balance the model when using shorty batteries.

*This product is designed to be used with batteries less than 95mm in length.

Standard part for T265.

When using the HBP mount it can be difficult to accurately position the rear body post holes in the bodyshell. By using this rear body height fitter it is quick and easy to precisely position the body post holes at the desired body height.

Adjust the chassis flex by connecting this carbon brace between the upper bulkheads on top of the top deck. This upper bulkhead brace is cut with high precision from 1mm carbon plate and can change the steering and traction characteristics by effecting the rigidity of the front or rear bulkheads.

Front of top deck: High-speed corner steering is increased. Low-speed corner steering decreased.
Rear of top deck: Increased rotation in the rear. Understeer is reduced. On power traction slightly reduced.

Adjust the chassis flex by connecting this carbon brace between the upper bulkheads on top of the top deck. This upper bulkhead brace is cut with high precision from 1mm carbon plate and can change the steering and traction characteristics by effecting the rigidity of the front or rear bulkheads.

Front of top deck: Good balance between high-speed and low-speed corner.
Rear of top deck: Good balance between rotation and traction.

A lightweight DJ CVD cross spider using high strength super duralium (A7075) to reduce the weight by approx 36% compared with standard steel. High durability is also achieved by applying a hard alumite treatment. Used in combination with T227LW lightweight DJ CVD joint it is possible to reduce the weight by about 2g per driveshaft.

High precision and high strength stainless steel lower arm shafts plated with a special lubricant to reduce resistance and provide ultra smooth suspension movement. Offers ultimate suspension performance.