IF14-2 OPTIONALS

IF14-2 OPTIONALS

There are 12 products.

Showing 97-108 of 140 item(s)

T265 - ADJUSTABLE REAR HBP MOUNT SET

HBP (Horizontal Body Post) mount set. For mounting the body posts in a horizontal position at the rear end of the car. By mounting the rear body posts horizontally the center of gravity around the rear of the car is lowered and the downforce of the body is transmitted more efficiently to the chassis improving corner speed. Especially suited to tracks with tight corners.

T268 - REAR BODY HEIGHT FITTER (for HBP)

When using the HBP mount it can be difficult to accurately position the rear body post holes in the bodyshell. By using this rear body height fitter it is quick and easy to precisely position the body post holes at the desired body height.

T269 - GRAPHITE UPPER BULKHEAD BRACE (Medium)

Adjust the chassis flex by connecting this carbon brace between the upper bulkheads on top of the top deck. This upper bulkhead brace is cut with high precision from 1mm carbon plate and can change the steering and traction characteristics by effecting the rigidity of the front or rear bulkheads.

Front of top deck: High-speed corner steering is increased. Low-speed corner steering decreased.
Rear of top deck: Increased rotation in the rear. Understeer is reduced. On power traction slightly reduced.

T269S - GRAPHITE UPPER BULKHEAD BRACE (Soft)

Adjust the chassis flex by connecting this carbon brace between the upper bulkheads on top of the top deck. This upper bulkhead brace is cut with high precision from 1mm carbon plate and can change the steering and traction characteristics by effecting the rigidity of the front or rear bulkheads.

Front of top deck: Good balance between high-speed and low-speed corner.
Rear of top deck: Good balance between rotation and traction.

T227LW - LIGHT WEIGHT D.J.CVD JOINT (2pcs)

Lightweight DJ CVD joint that is approx 1.2g lighter than standard steel (approx 1.8g) by using lightweight and high strength super duralium (A7075). Throttle response is improved by reducing the rotating mass, while front tyre wear and understeer is reduced.

T270 - LIGHT WEIGHT D.J.CVD CROSS SPIDER (4pcs)

A lightweight DJ CVD cross spider using high strength super duralium (A7075) to reduce the weight by approx 36% compared with standard steel. High durability is also achieved by applying a hard alumite treatment. Used in combination with T227LW lightweight DJ CVD joint it is possible to reduce the weight by about 2g per driveshaft.